HIKVISION DS-6900UDI Series Quick Start Guide

DS-6900UDI Series Decoder Quick Start Guide
9
Activation and Login
Activation
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. The device supports multiple activation methods, such as
activation via SADP software, web browser, and iVMS-4200 Client.
Refer to the user manual of iVMS-4200 Client for the activation via client software.
Default Information
The device default information is shown as below.
● Default IP address: 192.0.0.64
● Default user name: admin
Activate via SADP
SADP is a tool to detect, activate, and modify the IP address of the device over the LAN.
Before You Start
● Get the SADP software from the supplied disk or the official website
(http://www.hikvision.com/), and install it according to the prompts.
● The device and the computer that runs the SADP tool should belong to the same network
segment.
The following steps show how to activate one device and modify its IP address. For batch
activation and IP address modification, refer to User Manual of SADP for details.
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.

HIKVISION DS-6900UDI Series Specifications

General

Brand	HIKVISION
Model	DS-6900UDI Series
Category	Media Converter
Language	English