Need help?Do you have a question about the HIKVISION DS-6900UDI Series and is the answer not in the manual?
General| Model | DS-6900UDI Series |
|---|---|
| Category | Media Converter |
| Output Ports | HDMI, DVI |
| Resolution Support | Up to 1080p |
| Video Output | HDMI, DVI |
| Hard Disk | Not supported |
| RAID | Not supported |
| Network Interface | 10/100/1000Mbps Ethernet |
| Power Consumption | ≤5W |
| Storage Temperature | -20°C to +70°C |
| Humidity | 10% to 90% RH |
Details FCC compliance for the digital device.
Lists European standards compliance for EMC, LVD, and RoHS directives.
States compliance with Canadian ICES-003 standards.
Describes the DS-6900UDI Decoder's purpose and capabilities.
Lists the powerful decoding capabilities and supported formats.
Details the indicators and interfaces on the front panel of various models.
Explains the connectors and interfaces on the rear panel of different device models.
Guides on activating the device using the SADP software.
Provides steps for activating the decoder using a web browser.
Outlines the process for activating the device via client software.
Explains how to set up basic network parameters like IP, Subnet, Gateway.
Details how to enhance access security by managing services like SSH, SADP, HTTPS.
Describes how to configure auto-switch between main and sub-stream.
Explains the setup for transparent channel used for data forwarding.
Covers enabling synchronization for all video outputs.
Allows setting stopped decoding image and failed streaming image behavior.
Details adding, modifying, and deleting encoding devices.
Guides on setting up video wall layouts and linking decoding outputs.
Explains how to set output types and resolutions for BNC and HDMI.
Covers displaying decoded video on the video wall via dragging or coordinates.
Describes how to switch the active encoding channel for a decoding window.
Enables automatic switching between cameras in an area.
Allows dragging windows for decoding and window roaming.
Explains how to zoom in and out of roaming windows.
Enables saving and recalling video wall layouts as scenes.
Covers adding, modifying, and setting permissions for user accounts.
Displays detailed information about the decoder's hardware and firmware.
Guides on setting device time via NTP server or manual synchronization.
Configures serial port parameters for console or transparent channel modes.
Configures RS-485 serial port parameters for device connection.
Allows importing device configuration from a local file.
Allows exporting device configuration to a local file.
Instructions for upgrading the device firmware.
Guides on restoring factory default settings for the device.
Explains how to restart the device.
Provides an overview of the client software's main interface and toolbar.
Details how to add devices to the client software via IP or domain.
Covers adding, modifying, and linking decoding outputs to video walls.
Allows setting screen behavior for decoding end/failure and sub-window size.
Guides on setting output types and resolutions for BNC and HDMI.
Explains how to decode and display video streams on the video wall.
Details connecting and decoding thermal network cameras, including VCA.
Covers using RSC Server to display PC screen on the video wall.
Explains port link aggregation for enhanced bandwidth.
Guides on installing and configuring stream media server for network optimization.
Provides answers to frequently asked questions about the device.
Lists compatible third-party IP cameras and their supported video formats.
To Next Page
