EasyManuals Logo

HIKVISION DS-7316HQHI-F4/N Quick Start Guide

HIKVISION DS-7316HQHI-F4/N
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Digital Video Recorder Quick Start Guide
20
Figure 2-1 Fasten Hard Disk
Step 2 Connect one end of the data cable to the motherboard of DVR and the other end to the
HDD.
Figure 2-2 Insert Panel Key
Step 3 Connect the power cable to the HDD.
Figure 2-3 Open Panel Lock
Step 4 Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix
the HDD.

Other manuals for HIKVISION DS-7316HQHI-F4/N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7316HQHI-F4/N and is the answer not in the manual?

HIKVISION DS-7316HQHI-F4/N Specifications

General IconGeneral
Product colorBlack
Audio output channels1.0 channels
Video compression formatsH.264
BNC input ports1
Video input channels16 channels
USB 2.0 ports quantity2
Ethernet LANYes
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS
HDD interfaceSerial ATA
Maximum HDD capacity6000 GB
Power consumption (typical)45 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)445 x 390 x 70 mm

Related product manuals