DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 108
4. Click Format to format the backup device.
If the inserted storage device is not recognized:
Click Refresh.
Reconnect device.
Check for compatibility from vendor.
6 Alarm Settings
6.1 Setting Motion Detection
1. Go to Menu > Recording Configuration > Motion Detect.
Figure 141, Motion Detection Setup Interface
2. Select a camera you want to set up motion detection.
3. Set detection area and sensitivity.
4. Check checkbox to enable motion detection. Use the mouse to draw detection
area(s) or click Full Screen to set the detection area to be the full screen and drag the
sensitivity bar to set sensitivity.
5. Click S
et to set alarm response actions.
To Next Page
Loading...
