DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 114
Figure 152, Video Tampering Interface
2. Select a Camera you want to detect video tampering.
3. Check the Enable Video Tampering Detection checkbox.
4. Drag the sensitivity bar and choose a proper sensitivity level.
5. Click S
et to set handling method of video tampering. Set arming schedule
and alarm response actions of the channel.
6. Click Arming Schedule tab to set the response action arming schedule.
7. Select a day of the week, with up to eight time periods within each day.
Time periods cannot repeat or overlap.
Figure 153, Set Arming Schedule of Video Tampering
To Next Page
Loading...
