DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 166
Figure 224, Physical Disk Settings Interface
2. Click Create to enter the Create Array interface.
Figure 225, Create Array Interface
3. Edit the Array Name, set the RAID Level to RAID 0, RAID 1, RAID 5, RAID 6
or RAID 10, select the Physical Disk on which to configure the array.
If you choose RAID 0, at least two HDDs must be installed.
If you choose RAID 1, two HDDs need to be configured for RAID 1.
If you choose RAID 5, at least three HDDs must be installed.
If you choose RAID 6, at least four HDDs must be installed.
If you choose RAID 10, the number of HDDs installed should be even in
the range of four to 16.
4. Click O
K to create the array.
To Next Page
Loading...
