HIKVISION DS-7332HQI-K4 - Page 170

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 170
At least one available physical disk must exist for rebuilding the array.
Figure 231, Rebuild Array Interface
3. Select the available physical disk and click OK to confirm rebuilding the
array.
4. The “Do not unplug the physical disk when it is under rebuilding”
message box pops up. Click OK to start rebuilding.
5. Enter the Array Settings interface to view the rebuilding status.
6. After rebuilding successfully, the array and virtual disk will restore to
Functional.
12.1.7 Deleting Array
Deleting an array will cause deletion of all data saved on the disk.
1. Enter the Array Settings interface, Menu > System Configuration > HDD >
RAID > Array.