HIKVISION DS-7332HQI-K4 - HDD Management; Initializing HDDs

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 172
Figure 234, Firmware Interface
2. You can set the Background Task Speed in the drop-down list.
3. Click Apply to save the settings.
14 HDD Management
14.1 Initializing HDDs
Purpose
A newly installed hard disk drive (HDD) must be initialized before it can be used with the
DVR.
1. Go to Menu > System Configuration > HDD.
Figure 235, HDD Information Interface