HIKVISION DS-7332HQI-K4 - Page 95

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 95
Table 1-15 Detailed Explanation of Smart Playback Toolbar
Button
Operation
Button
Operation
Button
Operation
Draw line for the
line crossing
detection
Draw quadrilateral
for the intrusion
detection
Draw rectangle for
the intrusion
detection
Set full screen for
motion detection
Clear all
/
Start/Stop clipping
File management
for video clips
Stop playing
/
Pause playing
/
Play
Smart settings
Search matched
video files
Filter video files
by setting the
target characters
/
S
how/Hi
de VCA
information
5) Set the Smart Search rules and areas for VCA event or motion event.
• Line Crossing Detection: Select , and click on the image to
specify the start point and end point of the line.
• Intrusion Detection: Click , and specify four points to set a
quadrilateral region for intrusion detection. Only one region can
be set.
• Motion Detection: Click and then click and draw the mouse
to set the detection area manually. You can also click to set
the full screen as the detection area.
6) Click
to configure the Smart settings.
Figure 121, Smart Settings
• Skip the Non-Related Video: Non-related video will not be played
if this function is enabled.
• Play Non-Related Video at: S
et the speed to play the non-related
video. Maximum 8/4/2/1 are selectable.
• Play Related Video at: Set the speed to play the related video.
Maximum 8/4/2/1 are selectable.