HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
68
• Guest: Guest has the default permission of local log search and remote log search.
• Operator: Operator has the default permission of local log search, remote log search, two- way audio and camera configuration.
Figure 83, User Settings Menu
3. Click the OK button to confirm adding the user. Once a new user has been created, the fields behind Users will become editable, as
shown in Figure 83.
Changing the Permission of User
The Administrator can change the permission of both guest and operator. To change the permission:
1. Enter the User menu, shown in Figure 83 by going to Menu > System Configuration > User.
2. Click to enter the Permission interface, as shown in Figure 84, Figure 85, and Figure 86.
Figure 84, Local Configuration Permission Settings Menu
Figure 85, Remote Configuration Permission Settings Menu