Need help?Do you have a question about the HIKVISION DS-7604NI-E1/4P and is the answer not in the manual?
General| Display modes | Live view |
|---|---|
| Maximum frame rate | 60 fps |
| Maximum resolution | 1920 x 1080 pixels |
| Alarm input channels | 4 |
| Video input channels | 4 channels |
| Alarm output channels | 1 |
| Resolution at capture speed | 1920x1080@60fps |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power consumption (typical) | 10 W |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 5 |
| HDD interface | Serial ATA |
| Maximum storage capacity | 6 TB |
| Total installed storage capacity | 0 GB |
Weight and Dimensions| Depth | 230 mm |
|---|---|
| Width | 315 mm |
| Height | 45 mm |
| Weight | 1000 g |
Provides information about the applicability and content of the manual.
Acknowledges trademarks and logos of Hikvision and other owners.
Details FCC compliance for Class A digital devices.
Lists the two conditions for FCC compliance.
States compliance with EU directives and mentions WEEE and Battery directives.
Confirms compliance with Industry Canada ICES-003 standards.
Outlines serious risks like injury or death if warnings are neglected.
Outlines risks of injury or equipment damage if cautions are neglected.
Describes general connectivity and stream features.
Details features related to on-screen display and monitoring.
Covers features for managing hard disk drives, including capacity and types.
Details continuous and event recording, search, and playback functionalities.
Explains how to export video data and manage backup devices.
Covers alarm handling for various events like video loss, HDD full, network issues.
Lists functions like user management, manual alarm control, and configuration import/export.
Describes network interfaces, protocols, and remote access features.
Mentions SDK, source code, and development support.
Describes the front panel layout and button functions for different NVR models.
Explains how to use the IR remote control for NVR operations.
Describes the soft keyboard input methods used for text entry.
Details the rear panel interfaces and connections for various NVR models.
Explains the procedures for powering on and safely shutting down the NVR.
Details how to set the initial administrator password for device security.
Describes how to configure and use an unlock pattern for device login.
Guides users through essential NVR settings using an automated setup wizard.
Covers the process of logging into and out of the NVR system.
Explains how to activate, add, and manage IP cameras connected to the NVR.
Provides an overview of the live view mode and its icons.
Details various operations available in live view, including screen modes and controls.
Explains how to customize live view settings like output interface and dwell time.
Describes channel-zero encoding for remote viewing to reduce bandwidth.
Details how to set up PTZ parameters for camera control.
Explains how to customize and manage PTZ presets, patrols, and patterns.
Describes the PTZ control panel interface and its icons.
Allows configuration of image quality, resolution, and stream types for recording.
Guides setting up recording schedules for different times and event types.
Explains how to set up motion detection parameters to trigger recording.
Details configuration for recording triggered by alarm inputs.
Covers configuring recording based on Video Content Analysis events.
Explains how to start and stop recording manually.
Allows setting up special recording schedules for holidays.
Enables saving recordings to both primary and redundant HDDs for data safety.
Details how to group HDDs to manage storage for specific channels.
Covers locking recording files and setting HDD property to read-only.
Details methods for playing back recorded video files.
Explains additional playback features like frame-by-frame playback and thumbnails.
Details methods for backing up record files using various export options.
Covers management of external storage devices for backup operations.
Details how to configure motion detection alarms, areas, and sensitivity.
Explains how to configure handling actions for external sensor alarms.
Covers setup for detecting video loss and configuring alarm response actions.
Details configuration for detecting video tampering and setting alarm responses.
Explains how to configure handling actions for system exceptions like HDD errors.
Configures actions taken when an alarm or exception occurs (e.g., alerts, notifications).
Describes how to manually trigger or clear alarm outputs.
Details how to configure face detection rules, sensitivity, and linkage.
Explains vehicle detection setup, including lanes, rules, and picture capture.
Covers configuring line crossing detection rules, direction, and sensitivity.
Details intrusion detection setup, including threshold, sensitivity, and region drawing.
Explains region entrance detection rules, sensitivity, and region drawing.
Describes region exiting detection, referencing previous sections.
Covers loitering detection, referencing previous sections.
Explains people gathering detection, referencing previous sections.
Details fast moving detection, referencing previous sections.
Covers parking detection, referencing previous sections.
Explains unattended baggage detection, referencing previous sections.
Details object removal detection, referencing previous sections.
Covers audio exception detection, referencing previous sections.
Explains scene change detection, referencing previous sections.
Details defocus detection, referencing previous sections.
Explains PIR alarm setup, referencing previous sections.
Details how to search for detected face pictures and associated video files.
Explains how to search for suspicious behavior based on VCA detection.
Covers searching for vehicle plate pictures and related information.
Details how to use the people counting feature and generate reports.
Explains the heat map function for analyzing customer dwell times.
Details general network settings like IP address, gateway, and working modes.
Covers advanced network configurations such as PPPoE, Cloud P2P, and DDNS.
Explains how to monitor network traffic and view connection status.
Details tools for testing network delay, packet loss, and checking network status.
Details the process of initializing a newly installed hard disk drive.
Explains how to add and manage NAS or IP SAN disks as network HDDs.
Covers managing HDDs by grouping them for organized recording.
Allows configuring storage quotas for individual cameras.
Explains how to check the status of installed HDDs for potential issues.
Details functions for HDD detection, including S.M.A.R.T. and Bad Sector checks.
Covers configuring alarms for HDD errors or uninitialized states.
Explains how to configure On-Screen Display settings like date, time, and camera name.
Details how to set up privacy mask zones to obscure specific areas in the video.
Covers customization of image parameters like brightness, contrast, and saturation.
Explains how to view the NVR's system information and status.
Details how to search and export system log files for analysis.
Covers exporting and importing IP camera configuration data.
Explains how to export and import NVR configuration files for backup or deployment.
Details methods for upgrading the NVR system firmware.
Covers restoring the NVR to its factory default settings.
Details the configuration of the RS-232 serial port for parameter control or transparent channel.
Covers basic system settings like language, resolution, and time.
Explains how to configure Daylight Saving Time settings.
Allows adjustment of device-specific parameters like name, logout timeout, and output mode.
Covers adding, deleting, and editing user accounts and their permissions.
Lists the technical specifications for various NVR models.
Provides definitions for technical terms used in the manual.
Offers solutions to common issues encountered with the NVR.
Details changes and updates across different software versions of the manual.
Lists compatible Hikvision and third-party IP cameras for use with the NVR.
To Next Page
