6 Quick Start Guide - DS-7604 Series DVR
preview mode, the buttons can be used to pause/ resume auto sequence.
5. Status Indicators:
• POWER: the POWER indicator turns green when DVR is powered up.
• STATUS: the indicator lights when the compound key switches to numeric/letter input mode.
• Tx/Rx: TX/RX indictor flickers blue when network connection is functioning normally.
6. IR Receiver: operation by IR remote control.
Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text field before
you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to move on to
the next field.
To Previous Page
Loading...
Need help?
General