HIKVISION DS-HD1 User Manual

2
1
Shut off the electricity at the breaker that controls the Shut off the electricity at the breaker that controls the
doorbell’s circuit.doorbell’s circuit.
2
Insert one end of the wire harness into the power kit.
3
Remove the cover from your mechanical chime.
4
Remove the existing chime wires from the terminals
named TRANS and FRONT.
TRANSF RONTREAR
REAR
Power Kit Installation
• If you have a mechanical chime installed in your home, install the power kit and doorbell.
• If you have an electronic chime installed in your home, refer to its manual to install the power kit, and install the
doorbell.
• If no chime is installed, skip power kit installation, install the doorbell, and follow Option B on page 5.

HIKVISION DS-HD1 Specifications

General

Brand	HIKVISION
Model	DS-HD1
Category	Accessories
Language	English