To Next Page

To Previous Page

Figure 9-7 Remotely Open Door

Note

You can check Oine Authencaon to enable the super password authencaon when

the access control device is disconnected with the client.

Local Authencaon and Super Password

Authencaon by the access control device and by the super password.

4) Select the added person/card group in the

le list below and it will be added to the Selected

list on the right as the authencaon group.

5) Click the added authencaon group in the right list to set authencaon mes in the Auth

Times column.

Note

●

The authencaon mes should be larger than 0 and smaller than the added personnel

quanty in the personnel group.

●

The maximum value of authencaon mes is 16.

6) Click Save.

Note

●

For each access control point (door), up to four authencaon groups can be added.

●

For the authencaon group of which authencaon type is Local Authencaon, up to 8

person/card groups can be added to the authencaon group.

●

For the

authencaon group of which authencaon type is Local Authencaon and Super

Password or Local

Authencaon and Remotely Open Door, up to 7 person/card groups can

be added to the

authencaon group.

Click Save.

DS-K1T341C Series Face Recognion Terminal User Manual

165

HIKVISION DS-K1T341CM User Manual

Questions and Answers: