HIKVISION DS-K1T341CM User Manual

Figure 9-8 Set Output Transformaon Rule
2) Select rules on the le list.
The selected rules will be added to the right list.
3)
Oponal: Drag the rules to change the rule order.
4) Click OK.
5) In the Custom Wiegand tab, set the rule's start bit, length, and the decimal digit.
7.
Click Save.
9.7.5
Congure Person Authencaon Mode
You can set the passing rules for person to the specied the access control device according to your
actual needs.
Before You Start
●
Add access control device to the client, and make sure the access control device support the
funcon of person authencaon.
●
Add person and assign access authorizaon to designed person. For details, refer to Person
Management and Set Access Group to Assign Access Authorizaon to Persons .
DS-K1T341C Series Face Recognion Terminal User Manual
167

HIKVISION DS-K1T341CM Specifications

General

Brand	HIKVISION
Model	DS-K1T341CM
Category	Touch terminals
Language	English