HIKVISION DS-K1T341CM

2.
Drill holes on the wall or other surface according to the instrucons on the mounng template.
3.
Route the cable through the cable hole of the mounng plate, and connect to corresponding
external devices' cables.
4.
Align the holes to the
mounng plate and secure the mounng plate on the wall with the 4
supplied screws.
Figure 3-8 Install Mounng Plate
5.
Align the device with the mounng plate and hang the device on the mounng plate.
DS-K1T341C Series Face Recognion Terminal User Manual
12