HIKVISION DS-K1T343MX - Page 115

Steps
1.
Click Conguraon → Video/Audio → Prompt .
Figure 9-8 Customize Audio Content
2.
Select Prompt as TTS(Text to Speech) to turn the text to audio content.
3.
Select me schedule.
4.
Enable the
funcon.
5.
Set the appellaon.
6.
Set the me period when authencaon succeeded.
1) Click Add.
2) Set the
me duraon and the language.
Note
If authencaon is succeeded in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4) Oponal: Repeat substep 1 to 3.
5)
Oponal: Click to delete the congured me duraon.
7.
Set the me duraon when authencaon failed.
1) Click Add.
2) Set the
me duraon and the language.
DS-K1T343 Series Face Recognion Terminal User Manual
101