HIKVISION DS-K1T343MX - Access Control Settings

Press Buon to Call
Steps
1.
Click Intercom → Press
Buon to Call to enter the sengs page.
2.
Set the parameters.
-
Edit call No. for every
buon.
-
Check Call Management Center to set the buon calling center.
Note
If you check Call Management Center and set the call No. as well, call management center has
higher privilege than call No.
9.5.20 Access Control Sengs
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Figure 9-13 Door Parameters Sengs Page
Click Save to save the sengs aer the conguraon.
Door No.
DS-K1T343 Series Face Recognion Terminal User Manual
115