Part 2: How to check video record and captured picture on IVMS-4200
1. Install Storage Server and IVMS-4200 Client. Launch the Storage Server and IVMS-4200 Client. Add Storage
Server to client.
2. Click the Storage Server in the device list, go to Remote ConfigurationStorageGeneral, and choose a
disk on your computer to format. The disk capacity must be 2GB-4TB. The formatted disk will be used to
save pictures and video record. The whole formatting process may cost several seconds. Wait until the
progress reaches 100%. Then, if the disk status becomes “Normal”, the formatting succeeds. According to
the demand, set quota ratio for recording and picture.
To Next Page
Loading...
