Need help?Do you have a question about the HIKVISION DS-3WAP621E-SI and is the answer not in the manual?
General| Model | DS-3WAP621E-SI |
|---|---|
| Type | Wireless Access Point |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Max Data Rate | 1200 Mbps |
| Ethernet Port | 1 x 10/100/1000 Mbps |
| Operating Humidity | 10% to 90% (non-condensing) |
| Power Supply | PoE (Power over Ethernet) |
| Antenna | Internal antenna |
| Operating Temperature | -10°C to +55°C |
Instructions for using and managing the product, information subject to change.
Product after-sales service support limited to country of purchase.
Hikvision owns copyrights and patents for products; no part of the document may be copied without permission.
Document and product provided "as is"; Hikvision disclaims warranties and liability for damages.
Specifies that this manual is applicable to the DS-3WAP621E-SI access point.
Defines symbols used in the document: Note, Caution, Danger.
Recommendations to avoid injury and device damage, including placement and maintenance.
Lists required tools for installation; none are provided with the device.
Lists items included in the package; accessories must be prepared separately.
Steps for mounting the AP on a junction box, including cable connection.
Steps for mounting the AP on a wall, including marking, drilling, and securing.
Steps for mounting the AP on a ceiling, including cutting groove and securing.
Explains the meaning of different LED colors and blinking patterns for device status.
Provides a QR code for accessing more frequently asked questions and information.
To Next Page
