Figure 3-5 Create a Noce
4. Edit the noce on the right panel.
1) Click ... on the Send To eld to pop up the Select Resident dialog.
2) Check the checkbox(es) to select the resident(s). Or you can check the All
checkbox to select all the added residents.
3) Click OK to save the selecon.
4) Enter the subject on the Subject eld.
Note
Up to 63 characters are allowed in the Subject eld.
5)
Click
in the Type eld to unfold the drop-down list and select the noce type.
6)
Oponal: Click View to add a local picture to the noce.
Network Indoor
Staon Operaon Guide
16
To Next Page
Loading...
Need help?
General
