Do you have a question about the HIKVISION DS-KH9310-WTE1 and is the answer not in the manual?
Model | DS-KH9310-WTE1 |
---|---|
Category | Intercom System |
Type | Indoor Station |
Touch Screen | Yes |
Operating System | Embedded Linux |
RAM | 1 GB |
ROM | 8 GB |
Wi-Fi | Yes |
Audio Input | Built-in Microphone |
Audio Output | Built-in Speaker |
Audio Compression Rate | 64 Kbps |
Alarm Output | 1 |
RS-485 | Yes |
Operating Humidity | 10% to 90% (non-condensing) |
Weight | 1.2 kg |
Resolution | 1024 x 600 |
Ethernet | 10/100Mbps |
Audio Compression Standard | G.711 |
Network Protocol | TCP/IP |
Alarm Input | 1 channel |
TF Card | Support up to 32 GB |
Power Supply | 12 VDC/1 A |
Operating Temperature | -10 °C to 55 °C |
Bluetooth | Not Supported |
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Indicates a potentially hazardous situation that could result in equipment damage or data loss if not avoided.
Details critical warnings regarding electrical safety, proper power usage, installation, and device malfunctions.
Lists precautions related to physical shock, temperature, moisture, sunlight, and aiming the device.
How to view live video feeds from connected door stations and network cameras.
Explains how to arm and disarm the room using different scene modes.
Instructions for installing and registering the Hik-Connect mobile application.
Steps to add the indoor station to the mobile client for remote access.
Details remote functions like live view, editing device names, and viewing versions via Hik-Connect.
Steps to initiate a call to an indoor station using the iVMS-4200 client.
How to answer or decline incoming calls from the client software.
How to view live video feeds from door stations using the client software.
How to check call logs, including dialed, received, and missed calls, via the client.
How to create and send notices to residents using the client software.