Need help?Do you have a question about the HIKVISION DS-KH6320-WTE2 and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Speakerphone | - |
| Connectivity technology | Wireless |
| Voice codecs | G.711u |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 32 GB |
| Display diagonal | 7 \ |
| Touchscreen type | Capacitive |
| Display resolution | 1024 x 600 pixels |
| Display technology | LCD/TFT |
| Product color | Black, Grey |
| Operating system installed | Linux |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Supported network protocols | TCP/IP, SIP, RTSP |
| Outdoor unit included | No |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power consumption (typical) | 6 W |
Weight and Dimensions| Depth | 15.1 mm |
|---|---|
| Width | 200 mm |
| Height | 140 mm |
Steps to create a password and activate the indoor station.
Guides through initial setup steps like language and network configuration.
Configures network connection, IP address, subnet mask, and gateway.
Configures network parameters for linked devices like door stations.
Assigns intercom numbers to indoor stations and extensions.
Configures SIP protocol for device communication, including passwords.
Steps to add cameras to the video intercom system.
Configures zone types, alarm types, and delay times for security.
Sets unlock passwords, duress codes, and scene passwords for the station.
To Next Page
