HIKVISION DS-KH6320-WTE2 User Manual

Figure 2-7 Device Informaon
Restore the door
staon via indoor staon.
Tap to restore the parameters of the door staon.
Modify the IP address of the linked door staon.
Tap to edit the IP address of door staon.
5.
Select the device to link. Edit the network parameters.
2.3.3 Set Indoor Staon No.
Indoor staon No. and the indoor extension No. are numbers, which can be dialed
by other devices to call the indoor staon and the indoor extension in an intercom
system. The indoor staon No., is composed of the oor No. and the room No.
The indoor extension No. Should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor staon.
Steps
1.
Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap to enter the indoor staon sengs page.
Video Intercom Indoor
Staon Conguraon Guide
8

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm