HIKVISION DS-KH6320-WTE2 User Manual

4.
Open the E-mail to get the vericaon code.
5.
Tap Next, and enter the vericaon code from the E-mail.
6.
Tap Next, and create the new password.
Note
The new password is used for admin login, remote SDK login, SSH login, and Web
login.
2.5 Synchronize Time
Steps
1.
Tap
Sengs → → Time and Date to enter the me synchronizaon page.
Figure 2-11 Time Synchronizaon
2.
Tap Date Format and Time Format to set the me format.
3.
Oponal: Tap Time to set me manually.
4.
Tap Sync Time.
1) Enable Enable NTP.
2) Set the synchronizing interval, enter the IP address/domain of NTP server
and port No., and select the
me zone.
Note
•
The default unit of synchronizing interval is minute.
•
The me zone can be congured as well if the NTP is not enabled.
Video Intercom Indoor Staon Conguraon Guide
14

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm