HIKVISION DS-KH6320-WTE2 User Manual

2.4.1 Modify Unlock/Duress Code
You can create and edit the duress code, unlock password and scene password of
the indoor staon.
Steps
1.
Tap
Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap Password.
3.
Tap Unlock, Duress Code or Scene Password to pop up the password
sengs
dialog box.
Unlock
Create the indoor staon's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to
nofy the management center
secretly.
Scene Password
When you enable Scene Password, there is no need to enter password
during scene mode switching.
Note
The duress code and the unlock password cannot be the same.
4.
Create a new password and
conrm it.
5.
Tap OK to save the sengs.
2.4.2 Modify Admin Password
If you forget admin (acvaon) password when entering Conguraon page, you can
modify it via vericaon code from E-mail.
Before You Start
The E-mail address has been registered
aer acvaon.
Steps
1.
Tap Forget Password in Admin Password Entering page.
2.
Run Hik-Connect client
soware.
3.
Scan the QR code via Hik-Connect.
Video Intercom Indoor
Staon Conguraon Guide
13

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm