HIKVISION DS-KH6320-WTE2 User Manual

Figure 2-8 Set Indoor Staon Informaon
3.
Select Indoor Staon Type from Indoor Staon or Indoor Extension according to
your actual needs.
-
Indoor
Staon: You can set the indoor staon's room informaon, including
the room name, community No., building No., Unit No., oor, and room No.,
the live view duraon, the SIP register password, the SIP parameters,
password and E-mail address.
-
Indoor Extension: You can set the indoor extension's room informaon,
including the room name and the extension No., live view duraon, the SIP
register password, password and E-mail address..
4.
Tap Room Informaon and set room name, community No., building No., unit
No., oor No., and room No. according to your actual needs.
2.3.4 SIP
Sengs
Devices can communicate with each other via SIP protocol. You create set the SIP
register password, enable standard SIP and set VIOP account.
Steps
1.
Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap SIP Sengs in Local Informaon Page.
3.
Set SIP registraon password.
1) Tap Registraon Password.
2) Create a new SIP register
registraon password and conrm the password.
3) Tap OK.
4.
Oponal: Enable standard SIP.
Video Intercom Indoor
Staon Conguraon Guide
9

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm