HIKVISION DS-KH6320-WTE2 User Manual

2 Local Operaon
2.1 Acvate Indoor Staon
You can congure and operate the indoor staon aer creang a password for the
device acvaon.
Steps
1.
Power on the device. It will enter the acvaon page.
Figure 2-1 Acvaon Page
2.
Create a password and conrm it.
3.
Oponal: Bind email address. You can reset the acvaon/admin password via
the email if you forget your password.
1) Enable Bind Email.
Note
By default, the funcon is enabled.
2) Enter the email address.
4.
Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
Video Intercom Indoor Staon Conguraon Guide
2

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm