HIKVISION DS-KH6320-WTE2 User Manual

Unbound EZVIZ Account
Unlink the Hik-Connect account from the plaorm.
Wizard
Tap Wizard and set the language, network, indoor staon type, device No., and
select a device according to the wizard.
Tap Sengs → to enter the preference page.
Shortcut Sengs
Enable call elevator, alarm, call management center, or leave message and the
icon will be displayed on the home page.
Zone
Sengs
Note
Only when enable Alarm in the shortcut sengs, can the Zone Sengs
displayed on the Preference page.
Set the zone parameters. For details, see Zone Sengs.
Scene Sengs
Note
Only when enable Alarm in the shortcut sengs, can the Scene Sengs
displayed on the Preference page.
Set the scene parameters, including the stay mode, the away mode, the sleeping
mode, or customize the scene. For details, see Arming Mode Sengs.
2.10 Device
Informaon
View the device informaon, including the version, model, serial No. and open
source disclaimer.
Steps
1.
Tap Sengs → → Device Informaon to enter the Device Informaon page.
2.
View the device version, module, and serial No.
3.
Oponal: Tap Open Source Disclaimer to view the OSS statement.
2.11 Output
Sengs
Video Intercom Indoor Staon Conguraon Guide
19

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm