Edit a name for the device as you want.
Address
Input the device's IP address. The IP address of the device is obtained
automacally in this adding mode.
Port
Input the device port No. The default value is 8000.
User Name
Input the device user name. By default, the user name is admin.
Password
Input the device password. By default, the password is 12345.
6.
Oponal: You can check the checkbox Export to Group to create a group by the
device name. All the channels of the device will be imported to the
corresponding group by default.
The client also provides a method to add the oine devices. Check the checkbox
Add Oine Device, input the required informaon and the device channel
number and alarm input number, and then click Add. When the oine device
comes online, the soware will connect it automacally.
Note
•
Add Mulple Online Devices: If you want to add mulple online devices to
the client soware, click and hold Ctrl key to select mulple devices, and
click Add to Client to open the device adding dialog box. In the pop-up
message box, enter the user name and password for the devices to be
added.
•
Add All the Online Devices: If you want to add all the online devices to the
client soware, click Add All and click OK in the pop-up message box. Then
enter the user name and password for the devices to be added.
3.2.2 Modify Network Informaon
Select the device from the device list, click , and then you can modify the network
informaon of the selected device.
Note
You should enter the admin password of the device in the Password eld of the pop-
up window to modify the parameters.
Video Intercom Indoor Staon Conguraon Guide
24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
