EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KH6320-WTE2

HIKVISION DS-KH6320-WTE2 User Manual

HIKVISION DS-KH6320-WTE2
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Figure 3-1 Add the Device
4.
Oponal: Click Online Device, the acve online devices in the same local subnet
with the client soware will be displayed on the Online Device area.
Note
To add online devices to the soware, you are required to change the device IP
address to the same subnet with your computer rst.
1) You can click Refresh Every 60s to refresh the informaon of the online
devices.
2) Select the devices to be added from the list.
3) Click Add to Client to add the device to the client.
5.
Input the required
informaon.
Nickname
Video Intercom Indoor
Staon Conguraon Guide
23

Other manuals for HIKVISION DS-KH6320-WTE2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH6320-WTE2 and is the answer not in the manual?

HIKVISION DS-KH6320-WTE2 Specifications

General IconGeneral
ColorYes
Speakerphone-
Connectivity technologyWireless
Voice codecsG.711u
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Display diagonal7 \
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Display technologyLCD/TFT
Product colorBlack, Grey
Operating system installedLinux
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocolsTCP/IP, SIP, RTSP
Outdoor unit includedNo
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Power consumption (typical)6 W
Weight and Dimensions IconWeight and Dimensions
Depth15.1 mm
Width200 mm
Height140 mm

Related product manuals