HIKVISION DS-KH6320-WTE2 User Manual

You can set the displayed me and date format, current me. You can also tap
Sync Time and enable NTP to synchronize the device me.
Note
•
Make sure your device is connected with the network or the NTP funcon
will not available.
•
For details, see Synchronize Time.
System Language
Tap System Language to change the system language.
Note
The indoor staon supports 11 languages.
Brightness Adjustment
Tap + or - to adjust the screen brightness.
Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the
screen within the
me duraon.
Note
•
Aer enabling Clear Screen funcon, press and hold the Unlock key to exit
the clear screen mode.
•
The device without unlock key will exit the clear screen mode automacally
when the me is out.
TF Card
Tap TF Card to view the TF card and you can also format the TF card.
Tap
Sengs → to enter the advanced sengs page.
Reboot Device
Tap Reboot Device to reboot the system.
Tap Sengs → → Conguraon .
Enter the admin
(acvaon) password and tap OK to enter the local informaon
page.
Tap to enter the system maintenance page.
Upgrade
Tap Upgrade to get the upgrade package online and reboot automacally.
Video Intercom Indoor
Staon Conguraon Guide
18

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm