HIKVISION DS-KH9310-WTE1 User Manual

2 Wake Up the Device
You should wake up the device from the standby mode to enter the main page.
When you enable the gesture password funcon, you should enter the gesture
password to unlock the device.
Steps
1. Touch the screen to wake up the deivce.
2. Enter the gesture password to unlock the device.
Note
●
When you forget the gesture password, you can tap Forgot Gesture Password
or Use admin password to enter admin password to unlock.
●
When you tap Sengs → Advanced Sengs to disable Unlock by Gesture, you
can skip the step.
Video Intercom 9 Series Indoor Staon Operaon Guide
2

HIKVISION DS-KH9310-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH9310-WTE1
Category	Intercom System
Language	English