Need help?Do you have a question about the HIKVISION DS-KH8300-T and is the answer not in the manual?
General| Model | DS-KH8300-T |
|---|---|
| Category | Intercom System |
| Display | LCD |
| Operation Method | Touch screen |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Audio Compression Rate | 64 kbps |
| Operating System | Embedded Linux |
| Ethernet | 10/100 Mbps |
| Alarm Input | 1 channel |
| Alarm Output | 1 channel |
| RS-485 | Yes |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| Display Screen | 7-inch color display |
| Resolution | 1024 x 600 |
| Audio Compression Standard | G.711 |
| Connectivity | Ethernet, Wi-Fi (optional) |
| Network Protocol | TCP/IP |
| TF Card | Support |
Lists critical safety precautions to prevent serious injury or death from device operation.
Provides precautions to avoid potential injury or equipment damage during device use.
Covers the process and dimensions for installing the indoor station onto a wall using a gang box.
Provides wiring diagrams and instructions for connecting various indoor station models.
Guides on creating a community structure (project, community, building, floor, room) in the setup tool.
Explains how to activate and configure online indoor stations using the setup tool.
Describes the process of activating devices remotely using the batch configuration software.
Details how to modify network settings like IP address and port for online devices.
Explains various methods for adding devices to the configuration software.
Covers how to remotely configure system parameters like General, Time, and Maintenance.
Describes the process of activating the device directly on its interface.
Covers various settings including passwords, sound, arming modes, zones, and maintenance.
To Next Page
