Need help?Do you have a question about the HIKVISION DS-KH8301-WT and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Video codecs | H.264 |
| Certification | FCC, IC, CE, C-TICK, ROHS, REACH, WEEE |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Voice codecs | G.711u |
| Display diagonal | 7 \ |
| Touchscreen type | Capacitive |
| Display resolution | 1024 x 600 pixels |
| Display technology | LCD/TFT |
| Proper use | Indoor |
| Control type | Touch |
| Product color | White |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, RTSP |
| Outdoor unit included | No |
| Operating system installed | Linux |
| Operating relative humidity (H-H) | 10 - 90 % |
| Main monitor station operating temperature (T-T) | -10 - 55 °C |
| Indoor unit power type | AC/DC |
| Power consumption (typical) | 10 W |
| Megapixel | 0.3 MP |
| Sensor type | CMOS |
| Maximum frame rate | 30 fps |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 32 GB |
Weight and Dimensions| Depth | 26 mm |
|---|---|
| Width | 217 mm |
| Height | 142 mm |
Details critical safety warnings and precautions to prevent injury, death, or equipment damage.
Provides step-by-step instructions for the physical installation of the indoor station.
Guides users on how to correctly connect the indoor station electrically.
Lists the default admin, unlocking, and arming/disarming passwords for initial access.
Configures the hierarchical structure (project, community, building, floor, room) for the system.
Details the process for activating and configuring the indoor station's parameters.
Explains how to remotely activate devices using the batch configuration software.
Guides on modifying network settings such as IP address for multiple devices.
Outlines methods for adding devices to the system via IP, segment, or port.
Manages devices (activate, add, edit, delete) using the iVMS-4200 client.
Step-by-step guide for activating the device directly on its interface.
To Next Page
