HIKVISION DS-KIS202 User Manual

Video Door Phone·User Manual
iii
 Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
 Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the endurance of
sensor at the same time.
 Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface
coating of the device cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
 Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.
 Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.

HIKVISION DS-KIS202 Specifications

General

Camera included	Yes
Connectivity technology	Wired
Maximum number of cameras supported	1
Display diagonal	7 \
Display resolution	800 x 480 pixels
Display technology	TFT
Megapixel	1 MP
Sensor type	CMOS
Maximum frame rate	25 fps
Optical sensor size	1/4 \
Maximum video resolution	720 x 576 pixels
Product color	White
Housing material	Aluminum
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	5 W

Weight and Dimensions

Depth	42 mm
Width	128 mm
Height	24.8 mm
Power supply dimensions (WxDxH)	195.8 x 132.8 x 18.39 mm