EasyManua.ls Logo

HIKVISION DS-MCW407 Series - Chapter 1 Product Introduction; Overview and Key Features; Default Information

HIKVISION DS-MCW407 Series
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No. Name Descripon
16
In menu, conguraon, and
input mode, tap it to enter the
sub-menu, and conrm the
selecon or entered content.
17 Alarm
Aer the device starts up, hold
it to send the alarm signal to the
connected plaorm manually.
18 PTT
Aer the device starts up, hold
it to set the device as a MIC or
loudspeaker to start two-way
audio.
19 Fn
During record, press it to set a
tag for the current video. Then
hold it to cancel the tag.
Note
Tagging only takes eect with
the current record. When the
record ends, tagging stops.
20 LED 1
Solid red: The device is being
charged.
Solid green: The device is fully
charged.
Flashing red (high frequency):
The device is in low baery.
Flashing red (low frequency):
The device is recording.
21 LED 2
Solid green: The device is
running.
Flashing yellow (low
frequency): The device is
taping.
22
Expansio
n
interface
Reserved.
2 Installaon
2.1 Install Shoulder Clip
Install the shoulder clip if you want to wear the device on your
shoulder.
4

Other manuals for HIKVISION DS-MCW407 Series