HIKVISION DS-PDSMK-S-WE - Operations and Testing; Test Functionality

1.Paste the sponge tape on the rear side of the detector.
2.Tear off the film.
3.Paste the detector on the required place.
Press and hold the Test/Hush buon, and the buzzer and LED will indicates the alarm.
WARNING: The smoke alarm has a loud alarm signal. Use hearing protecon when tesng smoke alarms.
Test
Mounng with Sponge Tape
4
Up to 12 smoke detectors can be interconnected, with a typical distance of 30 m indoors and 100 m in free space. Interconnecon range depends on the
building construcon, and is influenced by the building structure and any intervening structures that may absorb or reflect radio signals.
r = 100 m in free space, 30 m indoors (depending on construcon and obstrucons)
1. Turn on the power switch on the boom of the first detector.
5
Interconnect Funcon Configuraon
Interconnecon limitaons
7
9
11
3
6
4 12 1
2
5
200m
8
10
3 S
1 s 1 s
0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s
……
……
T
E
S
T
/
H
U
S
H
T
E
S
T
/
H
U
S
H
>50 cm
Note: Installing with sponge tape is non EN compliant.