HIKVISION DS-PK1-LT-WE Series User Manual

DS-PK1-LT-WE/WB Series
Wireless LCD Keypad
Diagram References
E N G L I S H
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL
NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Appearance
2
Indication
1
+ identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current.
No naked flame sources, such as lighted candles, should be placed on the equipment.
The serial port of the equipment is used for debugging only.
Install the equipment according to the instructions in this manual.
To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.
Keep right direction when using the equipment.
The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation.
After the installation, the equipment, including any associated mounting plate, shall not be damaged.
Fault
Fire Alarm
Panic Alarm
Medical Alarm
Stay Arm
Away Arm
Settings
Output
Disarm
Back
Scroll Up/Delete
Scroll Down
Confirm
Swipe Tag
Query
Lock
Armed/Disarmed
Enrollment/Signal Strength
With Fault
Enrollment
LED Description
Armed
Disarmed
Solid orange
Solid blue
Solid green
Alarm
Find Me Mode
Note: Event Alarm Priority > Tampering Alarm Priority
Tampering Alarm: Solid red
Event Alarm: Flashing red
No Alarm: Off
Flashing red
ONo Fault
Signal Strength
Power On
Back Light
Alarm
Flashing green: Strong
Flashing orange: Medium
Flashing red: Weak/Disconnect
Flashing orange: Enrolling
Green ashes 7 times: Enrolled
Solid green for 1 s
-The back light is on by default, you can set the On/O schedule on
the web client/APP of the control panel. Refer to the user manual of
control panel.
-It turns o when there is no key operation for more than 10 s to 30 s
(adjustable).
-If the keypad is not enrolled to the control panel, the back light is
o.
1
Tamper Switch
Power Switch
Touch Key Serial Port
MCU Serial Port
RFM Serial Port
Flashing green
Flashing blue
Entry Delay
Exit Delay
UD27093B

HIKVISION DS-PK1-LT-WE Series Specifications

General

Model	DS-PK1-LT-WE
Category	Keypad
Power Supply	Battery Powered
Operating Voltage	3 VDC
Ingress Protection	IP54
Weight	150g
Security Level	Grade 2
Tamper Protection	Yes
Communication	Wireless
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90% (non-condensing)
Shell Material	ABS
Battery Life	Up to 3 years

Summary

Diagram References

Appearance

Details the physical layout of the keypad, including buttons, ports, and indicators.

Indication

LED Description

Explains the meaning of different LED colors and patterns for status indication.

Back Light

Details the keypad backlight behavior and its adjustable settings.

Buzzer Description

Enrollment

Enroll the Peripheral Locally

Describes enrolling the keypad locally via the APP and control panel.

Enroll the Peripheral with QR Code or Serial No.

Explains enrolling the keypad using QR codes or serial numbers via the APP.

Installation

CAUTION

Important safety warning regarding battery compartment closure and child safety.

Command

Events

Details events like arming, disarming, and alarms with their keypad command codes.

Arming Process (Enabled/Disabled on Control Panel)

Describes the pre-arming, fault checking, and exit delay states during the arming process.

Arm Directly

Explains how to directly arm the device and the indication for success or failure.

Cancel

Describes the procedure to cancel an arming process and its indications.

No Instant Operation

Explains the indication when the countdown finishes and the arming status.

Reset

Simple Mode

Arm

Explains how to arm the keypad in simple mode using tag swipes.

Disarm

Explains how to disarm the keypad in simple mode using tag swipes.

Note

Provides important notes regarding tag swiping intervals and limitations of simple mode.

Settings

User Management

Details managing users, including adding, editing, and deleting.

Tag Managment

Explains managing tags, including adding, editing, and deleting.

Restore Alarm

Describes how to confirm or restore tampered alarms, requiring installer permission.

Company/Telephone

Allows editing of company name and telephone number.

Control Panel Lock/Unlock

Explains the one-push lock/unlock function for the control panel, requiring installer permission.

Bypass/Restore Bypass

Describes bypassing and restoring bypassed zones.

Specification

Model

Lists the different models available for the wireless keypad.

Wireless technology

Details the wireless communication technology used by the keypad.

RF frequency

Specifies the radio frequency used for wireless communication.

RF modulation

Indicates the radio frequency modulation technique employed.

RF distance

Provides the wireless communication range in open areas.

LED indicator

Describes the colors and functions of the LED indicators.

Buzzer

Confirms the availability of a buzzer for alerts and feedback.

Power switch

Indicates the presence and function of a power switch.

Tamper-proof

Confirms the tamper-proof features and their location.

Serial port

Specifies the number of serial ports available on the device.

Tag reader built-in

Confirms the integration of a tag reader for authentication.

Numeric key

Details the function of the numeric keys on the keypad.

System fault display

Confirms the capability to display system faults.

System status display

Confirms the capability to display system status information.

Operation

Indicates support for operational functions via the LCD.

Configuration

Confirms support for device configuration through the LCD.

Power consumption

Provides details on the device's power consumption in different modes.

Battery

Details the battery type and expected lifespan.

Operation temperature

Specifies the acceptable operating temperature range.

Operation humidity

Specifies the acceptable operating humidity range.

Color

Indicates the color of the keypad.

Installation method

Describes the recommended method for installing the keypad.

Dimension (W×H×D)

Provides the physical dimensions of the keypad.

Weight

States the weight of the keypad with and without batteries.