Radar User Manual
7
Chapter 3 configuration
After the installation completes, power on the radar, starting to debug the
radar
3.1 Software Installation
Click the QR code below to download and install software
3.2 Connecting Radar
Select STJ79-3 to enter the software, click the upper left corner, and select
"WiFi connection" to enter the WiFi setting interface of the phone. Find the
WiFi of the RADAR to connect. The default WiFi name is RADAR+13 digits, and the
default password is 123456789
Then return to the debugging software and click "WiFi connection" again to
connect the device.
To Next Page
Loading...
