HIKVISION iDS-TCE907-BR Configuration Manual

Figure 1-15 Set Event Detecon
4.
Set Scene Mode according to the actual condions.
5.
Set the capture parameters.
Radar Track
The radar track of the target will be overlaid on the captured pictures.
Close Range Capture
Check it and set Capture Interval. The device will track the target unl one more picture is
captured in close distance according to the capture interval.
6.
Oponal: Select the violaon type(s) to be detected, and set the corresponding parameters.
Refer to
Set Violaon and Incident Detecon for details.
7.
Set the lane parameters. Refer to Set Linked Lane Parameters for details.
8.
Oponal: Check the other external input channel(s) to copy the same sengs.
9.
Draw lane lines.
1) Click Draw Lane Line.
2) Select the lane.
3) Set Lane Type and Right Border Line Type.
4) Select the default lane lines, right border line, and trigger line, and drag the two end points of
the line or drag the whole line to adjust its
posion according to the actual scene.
Network Trac Camera Conguraon Manual
25

HIKVISION iDS-TCE907-BR Specifications

General

Brand	HIKVISION
Model	iDS-TCE907-BR
Category	Security Camera
Language	English