Why Hiland Outdoor Fireplace burner flame is low?
A low burner flame on your Hiland Outdoor Fireplace can occur due to several reasons. It could be that the gas pressure is low, in which case you should turn the cylinder valve OFF and replace the cylinder. If the outdoor temperature is less than 40ºF and the tank is less than 1/4 full, use a full cylinder. Also, check the burner and orifices for any blockage if the control knob is fully ON.
How to fix carbon build-up and thick black smoke in Hiland Outdoor Fireplace?
Carbon build-up and thick black smoke in your Hiland Outdoor Fireplace may be due to dirt or film on the burner, so you should clean the burner. Another potential cause is a blockage in the burner. If there is a blockage, remove it and clean the burner inside and outside.
Instructions for assembling the glass panels and clamps for the fire pit.
Procedure for placing the assembled glass into the fire table body.
Pre-operation checks to ensure safe and proper functioning of the fire pit.
Instructions for storing the fire pit safely between uses and during long periods.
Information on required professional service and maintenance for gas passages.
General| Brand | Hiland |
|---|---|
| Model | AFP-RT |
| Category | Outdoor Fireplace |
| Language | English |
To Next Page
