Need help?Do you have a question about the Hills NVR-CH16 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Video Compression | H.264 |
| Hard Drive Capacity | Up to 6TB per HDD |
| Operating System | Embedded Linux |
| Video Output | 1 x VGA, 1 x HDMI |
| Hard Drive Support | 2 x SATA HDD |
| Audio Output | 1 channel |
| USB Interface | 2 x USB 2.0 |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% non-condensing |
| Video Input | 16 channels |
Provides step-by-step instructions for properly starting up, shutting down, and rebooting the NVR.
Details the process of adding detected online IP cameras to the NVR.
Sets image quality, stream type, resolution, pre/post-record times, and redundancy for recording.
Sets up motion detection areas, sensitivity, and triggers for recording and other actions.
Explains various methods to play back recorded video files by channel, time, event, logs, and external files.
Details methods for backing up record files: quick export, normal search, event search, and video clips.
Configures motion detection areas, sensitivity, and alarm response actions for cameras.
Defines how the NVR responds to alarms, including event hints, full-screen monitoring, and notifications.
Sets basic network parameters like IP address, gateway, and DNS server.
Covers PPPoE, Extranet Access, NTP, SNMP, Remote Alarm Host, Multicast, RTSP, Ports, Email, and NAT settings.
Prepares newly installed hard disk drives for use by initializing them.
Details firmware upgrade procedures via local backup device or FTP server.
Covers adding, deleting, and editing user accounts and their permissions.
Addresses issues with no video display on the monitor after startup.
Troubleshoots the 'Di-Di-Di-DiDi' warning sound, often related to HDD issues.
Diagnoses why IP cameras might show a 'Disconnected' status.
Resolves issues where live view freezes during local video output.
Addresses live view freezing during remote access via web browser or software.
Troubleshoots problems with audio, including no sound, excessive noise, or low volume.
Resolves freezing issues during single or multi-channel video playback.
Helps diagnose why no record files are found, checking system time, search conditions, and HDD status.
To Next Page
