Need help?Do you have a question about the Hills NVR-CH4 and is the answer not in the manual?
Details the components and functions of the NVR's front panel interface.
Describes the various ports and connectors located on the back of the NVR.
Provides instructions for the correct procedures for powering the NVR on and off.
Guides users through the process of integrating IP cameras with the NVR.
Explains how to navigate and use features within the live view interface.
Covers customization options for the live view display and output.
Sets up image quality, stream types, and resolution for recording.
Establishes automated recording times and types for cameras.
Details methods for searching and viewing recorded video footage.
Configures motion detection triggers and associated actions.
Defines how the NVR reacts to triggered alarms or exceptions.
Sets up fundamental network parameters like IP address and DNS.
Covers advanced network configurations like PPPoE, DDNS, and ports.
Guides on preparing new hard disk drives for use with the NVR.
Explains how to check HDD health using S.M.A.R.T. and bad sector tests.
To Next Page
General