Need help?Do you have a question about the Hills VoiceNav and is the answer not in the manual?
General| Brand | Hills |
|---|---|
| Model | VoiceNav |
| Category | Security System |
| Language | English |
Steps to arm the system in Away Mode using quick arm or pin code.
Steps to arm the system in Stay Mode, bypassing internal sensors.
Steps to disarm the system by entering a pin code after entering the premises.
Steps to arm all controllable areas in Away Mode using a pin code.
Steps to arm specific areas (e.g., 1 and 2) in Away Mode using pin code and selections.
Steps to disarm all areas in a multi-area system using a pin code.
Steps to activate fire, medical, or panic alarms by holding dedicated keys.
How to cancel an active emergency alarm by entering a pin code.
Steps to bypass a specific zone using the menu, pin code, and zone selection.
Steps to add a zone to the chime group by selecting the zone and setting chime.
Steps to turn on the chime mode for specific zones.
Steps to test the system's audible deterrents (sirens) by accessing System Test menu.
Steps to test the system's communicator by sending a test message to the central station.
Steps to test the condition of the system's backup battery.
Steps to test zone connectivity by activating alarm devices and listening for beeps.
Steps to set a new pin code for a specific user via the User Configuration menu.
To Next Page
