Hillsdale Furniture ROCKDALE BUNK BED User Manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 11-19-2013
Page 1 of 4
ROCKDALE BUNK BED
Model #1608/1688
STEP 1
Begin assembly by connecting
the Back Post (K) to the Upper
and Lower Panels (L & M) with 2
Long Screw Bolts (H) for each.
Then attach the Front Post
Headboard & Footboard (J) to the
Upper and Lower Headboard &
Footboards (L & M) with 2 Long
Screw Bolts (H) for each.
Finished piece seen in Figure 1.
QTYPART
16A
4C
62E
HARDWARE QTYPART HARDWARE
16
8
1
B
D
F
16G
16H
24I
HARDWARE LIST
A
B
C
D
E
F
G
H
I
(16)
(16)
(4)
(8)
(62)
(1)
(16)
(16)
(24)
Long Bolt 6.3x80
Half Round Nut
Short Bolt 6.3x35
Short Screw Bolt 7x80
Screw 4x35
Allen Key
Screw 4x25
Long Screw Bolt 7x100
Wood Connect 010x40
PIECES LIST
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
(2)
(2)
(2)
(2)
(1)
(2)
(4)
(1)
(1)
(1)
(2)
(1)
(4)
(2)
(2)
(2)
Front Post
Back Post
Upper Panel
Lower Panel
Upper Front Rail
Back Rail
Guard Rail
Upper Slats
Lower Slats
Ladder
Guard Rail Supports
Lower Front Rail
Side DRW Panels
Back DRW Panels
Bottom DRW Panels
Front DRW Panels
H
H
H
H
H
H
H
H
FIGURE 1
J
K
L
M
STEP 2
Repeat the instructions from step 1 to assemble
the second side.
TEAMWORK NEEDED
FOR ASSEMBLY

Hillsdale Furniture ROCKDALE BUNK BED Specifications

General

Brand	Hillsdale Furniture
Model	ROCKDALE BUNK BED
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Teamwork Needed for Assembly

Indicates that collaboration is required for the assembly process.

Step 1: Initial Frame Connection

Connect the Back Post (K) to Upper/Lower Front Rails (L, M) with Long Screw Bolts (H). Attach Front Post Headboard/Footboard (J) to Upper/Lower Headboard/Footboards (L, M) with Long Screw Bolts (H).

Step 3: Guard Rail Attachment

Attach top Guard Rails (P) to Back Post (K) using Wood Dowels (I) and Short Screw Bolts (D).

Step 4: Back Rail Installation

Attach Back Rails (O) to Back Post Headboard/Footboard (K) using Long Bolts (A).

Step 5: Repeat Panel Securing

Repeat the process from steps 1-5 to securely attach the remaining panel to all rails.

Step 6: Front Rail Attachment

Attach Upper Front Rail (N) and Lower Front Rail (U) to Front Post Footboard (J) using Long Bolts (A).

Step 7: Top Guard Rail Securing

Attach Top Guard Rails (P) to Front Post (J) using Wood Dowels (I) and Short Screw Bolts (D).

Step 8: Guard Rail Support

Attach Guard Rail Supports (T) to Upper Front Rail (N) using Long Screws (E).

Step 9: Ladder Installation

Attach Ladder (S) to Upper Front Rail (N) and Lower Front Rail (U) using Short Bolts (C).

Step 10: Lower Slat Installation

Attach Lower Slats (R) to Bottom Back Rail (O) and Lower Front Rail (U) using Long Screws (E).

Step 11: Upper Slat Installation

Attach Upper Slats (Q) to Upper Back Rail (O) and Upper Front Rail (N) using Long Screws (E).

Step 12: Side Drawer Panel Attachment

Attach Side DRW Panels (V) to Back DRW Panel (W) using Short Screws (G).

Step 13: Bottom Drawer Panel

Slide Bottom DRW Panel (X) into the drawer assembly, fitting it into the groove of the Back DRW Panel (W).

Step 14: Front Drawer Panel

Place Front DRW Panels onto assembled drawers and secure with Short Screws (G).

Step 15: Drawer Placement

Position drawers under the bed, aligning with blocks on Lower Front Rail (U), then slide them into place.

Important Safety Information