Hillsdale Furniture STACI 1525-010 User Manual

STEP 1
Begin assembly by attaching
ONE Side Panel (H) to the Back
Panel (G) by inserting each
Wood Dowel (E) and aligning
with the open holes to set in
place. Once in place, secure
from the outside using 2 Allen
Bolts (B) per each side. Place
Lock Washer (C) into the whole
at the side with the curved side
in. Tighten all bolts using the
Allen Wrench (F) that has been
provided.
STEP 2
Next attach both Mattress Rails
(J) to the SAME Side Panel (H)
using 2 Allen Bolts (A) from the
outside to secure in place.
Tighten all bolts.
HARDWARE LIST
(4) Allen Bolts 1/4” x 3”
(4) Allen Bolts 1/4” x 2
3
/
8
”
(4) Lock Washers
1
/
4
”
(6) Wood Screws 35mm
(12) Wood Pins 50mm
(1) Allen Wrench 4mm
A
B
C
D
E
F
PARTS LIST
(1) Back Panel
(2) Side Panels
(2) Mattress Rails
(1) Mattress Slats
G
H
J
K
STACI DAYBED
Model #1525-010 / 1526-010 / 1572-010 -Carton A
Model #1525-020 / 1526-020 / 1572-020 -Carton B
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-08-2013
Page 1 of 1
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 3
Repeat Steps 1 and 2 to
assemble the REMAINING Side
Panel (H) to the components
illustrated above.
STEP 4
Attach the Mattress Slats (K) to
the inside of each Mattress Rail
(J) by unrolling the slats and
setting in place. Once in place
secure to the support bar with 6
Wood Screws (D) to secure in
place. See next page for
Trundle assembly instructions.
D
A
B F
G
E
C
C
E
E
E
E
E
E
E
E
D
D
D
D
D
C
C E
H
J
K
J
J
H
H
H
G
A
A
B
B

Hillsdale Furniture STACI 1525-010 Specifications

General

Brand	Hillsdale Furniture
Model	STACI 1525-010
Category	Indoor Furnishing
Language	English

Summary

Staci Daybed Assembly Instructions

Step 1: Attach Side Panel to Back Panel

Attach one side panel to the back panel using dowels and Allen bolts.

Step 2: Attach Mattress Rails

Secure mattress rails to the side panel with Allen bolts.

Step 3: Attach Remaining Side Panel

Repeat attachment for the second side panel to complete the frame.

Step 4: Install Mattress Slats

Position and secure mattress slats onto the rails with wood screws.

Daybed Care and Maintenance

Instructions for cleaning and periodically checking hardware tightness.

Staci Trundle Assembly Instructions

Step 1: Attach Wood Knobs

Secure wood knobs to the front panel using screws.

Step 2: Attach Trundle Side Panels

Connect trundle side panels to the front panel with Allen bolts.

Step 3: Attach Trundle Back Panel

Secure the trundle back panel to the side panels using Allen bolts.

Step 4: Attach Wheel Blocks and Casters

Install wheel blocks and metal casters onto the front and rear panels.

Step 5: Install Slat Sets

Attach slat sets to the trundle unit using wood screws.

Trundle Care and Maintenance

Guidelines for cleaning and maintaining the trundle assembly.