Need help?Do you have a question about the Hillstone SG-6000-E1600 and is the answer not in the manual?
Describes the components and indicators on the front panel of various models.
Details of the console port configuration, connectors, and standards.
Describes the function and reset procedure of the CLR button.
Guidelines to prevent electrostatic discharge damage to the device.
Guidelines to prevent electromagnetic interference affecting the device.
Essential steps for proper device grounding for safety.
Procedure for placing the device on a stable workbench.
Procedure for mounting the device in a standard 19-inch rack.
Steps for attaching rack ears to the device chassis.
Steps for physically placing the device into the rack.
Procedure for proper grounding connection for safety.
Steps to connect the console port for device configuration.
Steps to connect the AC power cable to the device.
Detailed steps for establishing a console connection for configuration.
How to access and use the WebUI for device configuration.
Essential configuration tasks after initial setup for network deployment.
Procedure for installing a power supply module into the device.
Procedure for removing a power supply module from the device.
Procedure for installing an expansion module into the device.
Procedure for removing an expansion module from the device.
Procedure for installing a hard disk module into the device.
Procedure for removing a hard disk module from the device.
Steps to take if the administrator password is lost.
Diagnosing and resolving power system issues.
Diagnosing and resolving configuration system issues.
To Next Page
General
