Hillstone SG-6000-E2300 User Manual

Hillstone StoneOS User Manual
Hillstone SG-6000 E-Series Hardware
Reference Guide
www.hillstonenet.com
TWNO: TW-HW-ES-EN-V5.4-Y20M05

Hillstone SG-6000-E2300 Specifications

General

Brand	Hillstone
Model	SG-6000-E2300
Category	Firewall
Language	English

Summary

Name and Concentration of Toxic or Hazardous Substances and Elements in Products

Chapter 1 Introduction

Port Details

Describes Console, Aux, USB, Gigabit Copper, SFP, QSFP+, XFP ports.

SFP and SFP+ Port Details

Details SFP and SFP+ port attributes and optical modules.

QSFP+ and XFP Port Details

Describes QSFP+ and XFP port attributes and optical modules.

Chapter 2 Installation Preparations

Chapter 3 Installation

Before Installation and Workbench Setup

Pre-installation checks and instructions for workbench mounting.

Rack Mounting Installation

Steps for installing the device into a standard 19-inch rack.

Connecting Ground and Console Cables

Guides for connecting the ground wire and console cable.

Connecting Ethernet Cables

Instructions for connecting copper and fiber Ethernet cables.

Power Cable Connections

Procedures for connecting AC and DC power cables.

Chapter 4 Boot and Configuration

Establishing Configuration Environment

Methods for connecting to the device for initial configuration.

Console Connection Setup

Detailed steps for setting up a console connection via PC.

Terminal Session Settings and WebUI Access

Terminal settings and steps to access the device's Web User Interface.

Telnet/SSH and Basic Configuration

Mentions remote configuration and outlines fundamental configuration tasks.

Chapter 5 Hardware Maintenance and Replacement

Chapter 6 Troubleshooting

Power and Configuration System Issues