Hillyard TRIDENT WD21V

Need help?

Do you have a question about the Hillyard TRIDENT WD21V and is the answer not in the manual?

Summary

Understanding Manual Symbols

Open Book Symbol with i

Indicates consulting operating instructions.

Open Book Symbol

Indicates reading user manual.

Indoor Place Symbol

For indoor/dry place procedures.

Information Symbol

Provides additional information.

Warning Symbol

For safety instructions.

Protective Gloves Symbol

Obligatory use of gloves.

Recycling Symbol

Indicates environmental compliance.

Disposal Symbol

For appliance disposal instructions.

Main Switch Symbol

Indicates main power switch.

Filter Cleaning Button Symbol

Indicates filter cleaning button.

Safety Levels and Initial Machine Information

Hazard Level Definitions

Explains DANGER, WARNING, CAUTION levels.

Equipment Consignment Check

Procedures upon receiving the machine.

Introductory Comments

General introduction to the vacuum cleaner.

Intended Use Guidelines

Specifies proper and improper uses.

Machine Identification and Technical Specifications

Serial Number Plate Location and Importance

Details about the serial number plate.

Technical Specifications Overview

Lists machine's technical data.

Electrical Safety and General Usage Precautions

Electrical Connection Safety

Instructions for connecting to power.

Electrical Connection Cautions

Notes on voltage drops.

General Usage Safety Dangers

Risks during operation.

Operating Warnings and Prohibitions

General Operating Warnings

Safety advice during use.

Prohibited Substances for Suction

List of materials not to vacuum.

User Age and Capacity Restrictions

Guidelines for different users.

Machine Preparation and Handling

Handling the Packed Machine

Precautions for the packaged unit.

Unpacking and Initial Setup

Steps to unpack and prepare.

Moving the Machine Safely

How to transport the unit.

Machine Component Identification

Main Machine Components

Overview of primary parts.

Collection Tank Components

Detailed parts of the tank.

Preparation Safety Checks

Float Components for Liquid Vacuuming

Parts for wet operation.

Vacuum Head Components

Parts of the vacuum head.

Pre-Operation Safety Checks

Essential safety steps before use.

Installing Optional Filters and Bags

Inserting the Filter;Collection Bag

Step-by-step guide.

Installing the Nylon Filter

Inserting the Nylon Filter

Guide for nylon filter setup.

Installing the Permanent Fabric Filter

Inserting the Permanent Fabric Filter

Steps for fabric filter.

Attaching the Front Squeegee Kit

Fixing the Front Squeegee Kit

Instructions for assembly.

Finalizing Setup for Operation

Pre-Work Equipment Checks

Verifying condition and safety.

Accessory and Extension Connection

Connecting parts for operation.

Operating the Machine - Dry Vacuuming

Starting Dry Vacuuming

Steps to begin dry cleaning.

Operating the Machine - Wet Vacuuming

Starting Wet Vacuuming

Steps for wet cleaning.

Operating with Front Squeegee Kit

Wet Vacuuming with Squeegee

Instructions for this mode.

Enhancing Vacuum Performance

Improving Capacity Procedures

Methods to boost suction.

End of Work Procedures

End of Work Safety Checks

Ensuring machine is safe.

Cleaning and Storing the Machine

Procedures after use.

Daily Maintenance: Emptying and Cleaning

Emptying the Collection Tank (Solid Waste)

Removing dry debris.

Emptying the Collection Tank (Liquid Waste)

Draining liquids.

Daily Maintenance: Filter Removal

Removing the Paper Filter;Collection Bag

Steps for bag removal.

Cleaning Machine Accessories

Cleaning Accessories and Hoses

Instructions for cleaning vacuum cleaner accessories and hoses.

Cleaning the Front Squeegee

Specific steps for cleaning the optional front squeegee unit.

Weekly Maintenance: Cleaning the Collection Tank

Cleaning the Collection Tank

Detailed tank cleaning.

Cleaning Filters

Cleaning the Sponge Filter

Steps for sponge filter.

Cleaning Cartridge Filter

Cleaning the Cartridge Filter

Steps for cartridge filter.

Cleaning Float Assembly

Cleaning the Float Assembly

Steps for float unit.

Cleaning Permanent Fabric Filter

Cleaning the Permanent Fabric Filter

Steps for fabric filter.

Cleaning Nylon Filter

Cleaning the Nylon Filter

Steps for nylon filter.

Replacing Filters and Parts

Replacing the Sponge Filter

Guide for sponge filter.

Replacing Cartridge Filter

Replacing the Cartridge Filter

Guide for cartridge filter.

Replacing Permanent Fabric Filter

Replacing the Permanent Fabric Filter

Guide for fabric filter.

Replacing Nylon Filter

Replacing the Nylon Filter

Guide for nylon filter.

Replacing Squeegee Rubber Blades

Guide for squeegee rubbers.

Troubleshooting Common Issues

Machine Not Switching On

Solutions for power issues.

Insufficient Vacuum Diagnosis

Solutions for low suction.

Technical Information and Disposal

Electric Diagram Overview

Visual representation of circuitry.

Machine Disposal Instructions

Procedures for environmentally sound disposal.